This is the AD1 breakout module for one stepper control Axis from the F46 controller. This module will accept a Pololu style stepper driver.
- RJ45 to F46’s AXIS port (XYZABC)
- Screw terminals for P and N Limit switches, with 5V power for active switches.
- Screw terminals for Home switch, with 5V power for active switches.
- Screw terminals for Stepper Driver Power
- Pololu style driver connector
- 3 micro-step selection jumpers
- Screw terminals for stepper motor (2A 2B 1A 1B) and GROUND. Note: the GROUND pin here is typically used for a braid/shield of the motor wiring
- Jumper for connecting the RJ45 Shield to Ground.
Axis Stepper Driver for F46